Mon – Sat: 8:00 – 17:00

09 447 3857

Mon – Sat: 8:00 – 17:00

09 447 3857

Common Metal Roofing Issues and How They Can Be Avoided

If you have a metal roof, or you are considering installing metal roofing on your home, then there are some common metal roofing issues you should be made aware about, so as to avoid them. It’s true, most metal roofing issues can be directly traced back to the installation process. Mistakes made by roofers who lack the experience and training to make sure that metal sheets are properly installed are not uncommon, and, when this is the case, metal roofs will require more maintenance and will actually depreciate the value of your home.

Your home and new roof should be a one-time investment, not an ongoing expense that becomes a burden. That being said, the information provided here will definitely help home owners make a more educated decision on the roofing company that will install their new metal roof, to avoid common issues during installation and maintenance.

Common Metal Roofing Issues can be Avoided

Even though some property owners have experienced common metal roofing issues, these are proven to be one of the most durable roofing materials available that will protect your home for decades, if maintained properly. Below are some of the most common issues that can be avoided.

Common Roof Leaks

The most common issue is roof leaks, and the majority of leaks are attributed to poor craftsmanship during roof installation where gaps are left or metal roofing becomes damaged, which increases the likelihood of leaks occurring. The best way to avoid water damage is to address any discovered leaks as soon as possible by contacting a professional metal roof installer.

Dents, Punctures and Ponding Water from Foot Traffic

There are a few reasons to access a roof, for cleaning and maintaining gutter and downpipes, or to clean and remove debris. However, if those who mount the roof have little or no experience about roofing, then your roof can become damaged. Foot traffic is the most common cause of denting a metal roof, which causes ponding water to form, so, before you allow anyone to gain access to your metal roof, make sure they have experience and know how to traverse on the roof, without damaging it.

When water collects on the roof and does not drain, the weight of the water causes pressure that can lead to other problems, like tearing and leaking metal sheeting.

Blow-offs From Poor Installation

As was mentioned, improper roof installation is the main cause of roofing issues that can be avoided, by hiring proven professional roofers. If open seams or laps in metal sheeting exist, blow-offs could occur – when metal sheets ‘blow’ off or become raised and bent when heavy winds blow through.

The truly best way to avoid all types of common metal roofing issues is to hire an experienced metal roofing contractor, like Johnson Roofing, to install, repair, or replace your metal roof.

Optimized by: Netwizard SEO