A simple roof replacement involves swapping your outdated roof for a new one. However, you must remove the old roofing materials or components before installing the new ones. One of the most important steps in the roof replacement process is tearing off your old roof. To accomplish this, your roofing contractor essentially tears off the shingles and other components from the roof’s decking, eliminating your old roof section by section. It allows the roofers to put your new roof on a clear surface, just like an artist requires a blank canvas. Just be aware that there are instances where some homeowners forego the tear-off procedure; nevertheless, we’ll talk more about it in a moment.
You must understand how the roof tear-off procedure works after learning what it is. The fact that it appears to be total chaos but is actually a controlled disaster can be worrying. A roofing contractor safeguards your property, removes your old roof, and handles the old nails on your roof while this controlled chaos occurs. The three steps to remove your old roof are listed below.
Protecting Your Home Before the Roof Tear-Off Starts
When a roofing contractor is on your roof, one of their key responsibilities is to protect your property. But this is particularly true if you’re replacing your roof. Your roofing contractor will start rolling out safety tarps from the gutter to the ground as soon as they settle on an access point. These tarps should completely cover the plants and vegetation surrounding the roofline at your home’s base. By doing this, you can be sure that all the roofing debris that falls from your roof will end up in the dump trailer or the dump tarp rather than in your shrubs or yard. Additionally, if you have a pool, they will tarp it and move any outdoor furniture that might be destroyed.
Actual Tear-off Process
A “tear-off” fork is a tool that a roofing contractor uses to remove an old roof. These forks are small enough to go directly under the tiles and lift them. The tearing-off starts at the end farthest from the dump trailer and moves back towards the access point. Another crew is responsible for ensuring the torn-off debris land in the dump trailer or the tarped landing zone in your yard while one crew goes from section to section tearing off.
Time to Deal with Your Roof’s Old Nails
After the shingles and other components have been taken off, the old nails from your roof’s decking need to be disposed of. Your contractor will remove the nails if the ceiling or overhang is exposed. They will knock the nails down if the material is plywood to ensure they are driven straight and flush into the decking. By doing this, you can be sure that no old nail heads will intrude and will be out of the way when your new roof is installed. Your new roof is prepared to be installed once the old one has been removed, the deck has been cleaned, and one last visual check has been made to ensure all the nails have been knocked out.
When you spend money on a high-quality roof replacement, the tear-off procedure correctly prepares the roof for installation. Even while removing your old roof may seem like a simple task, it’s an important stage in the replacement process. It’s also best to know the best time to do re-roofing in Auckland for a more efficient process.
The team at Johnson Roofing has been providing high-quality roof replacements in the Auckland region from Orewa to Manukau. Our top priority is giving you and your family peace of mind. Our lifelong craftsmanship guarantee demonstrates how much we value our work. So, what are you waiting for? Contact us today for all your roofing needs!